Need help?Do you have a question about the Bentel Omnia 8 and is the answer not in the manual?
General| Brand | Bentel |
|---|---|
| Model | Omnia 8 |
| Category | Control Panel |
| Language | English |
Explains how digital keys control arming modes and partition management via a key reader.
Describes the different arming modes (Global, Type A, Type B, Stop Alarm) controllable via digital keys.
Explains how to perform Type A arming using a digital key, which arms/disarms specific partitions.
Explains how to perform Type B arming using a digital key, which arms/disarms specific partitions.
Outlines basic system control options accessible from the keypad using User Code PINs.
Details the procedure for globally arming partitions using a keypad and User Code PIN.
Details the procedure for globally disarming partitions using a keypad and User Code PIN.
Explains how to perform Type A or Type B arming via keypad, based on pre-programmed configurations.
Details the procedure to reset the alarm memory and force alarm signalling devices to standby.
Details how to test alarm devices connected to the system's alarm output.
Explains how Main Users can program or change User Code PINs for system access and control.
To Next Page
