Need help?Do you have a question about the Bentel KYO 4 M and is the answer not in the manual?
General| Model | KYO 4 M |
|---|---|
| Brand | Bentel |
| Number of Zones | 4 |
| Outputs | 2 |
| Material | Plastic |
| Communication | Wired |
Identifies components of ALISON-S and ALISON-DVP LCD keypads.
Identifies components of ALISON/32LP and ALISON/8L LED keypads.
Identifies components of MIA/S and MIA/D LCD keypads.
Identifies components of the OMNIA/TAST-R LCD keypad.
Details parts of M-IN/6 Input and M-OUT/6 Output Expanders.
Identifies parts of VRX32-433 and Vector/RX8 receivers.
Guide for installing system components like keypads and expanders.
Procedure for assigning unique addresses to system peripherals.
Steps for installing VRX32-433 and Vector/RX8 wireless receivers.
Wiring instructions for connecting keypads, readers, and expanders to the control panel.
Wiring guide for alarm detectors, fire detectors, and sirens.
Instructions for connecting the system to a telephone line for communication.
Overview of programming the system using PC software and its components.
Navigating software pages and managing customer data within the application.
Settings for system keypads, including type and enablement.
Settings for card and key readers, including arming modes.
Programming zone types, balancing, attributes, and cycles.
Setting up output behavior and signal assignments.
Defining partition settings and timing parameters.
Settings for telephone communication and remote service.
Programming user codes, installer codes, and key/card access levels.
Setting up wireless key functions and associations with codes.
Setting the system clock and managing PC/Modem communication.
To Next Page
