2
Measurements: 290mmW x 80mmH x 250mmD
Equipment: Main Control Box, Micro-Motor Handpiece,
Vacuum/Power Hose, Dustbags,
Mains Power Lead, Operating Instructions
Total Weight: 2.4 kg
Power: 240V
Warranty: 36 Months (Return to Base)
DO NOT use bent or damaged mandrels and burrs (tools).
Only use quality tools which have a shaft diameter of 2.35mm (some inferior tools may have undersized
shafts which may slip and damage the Handpiece).
To reduce any chance of overheating ensure clearance of at least 25mm around all sides of the
Main Control Box. Ensure the ventilation slots in the Main Control Box are clear of any blockage.
Ensure no liquids enter the Main Control Box or Handpiece.
DO NOT clean the the Main Control Box with an alcohol based cleaner.
Only use an alcohol-free surface wipe (eg: Clinell).
The Main Control Box can only be opened by authorised service technicians.
Unauthorised opening of Main Control Box will negate the Manufacturers Warranty.
Do not operate the PodoQ Drill in extremely hot or very damp conditions.
Prior to dismantling the handpiece for cleaning, it is imperitive that you read the section titled
“Dismantling the Handpiece” on Pg 7. Failure to do so may result in damage that will NOT be
covered under warranty.
Technical Data
ARTG#: 161350
Handpiece Weight: 140 g
Noise Level: 62dB
Safety Instructions Please ensure the following are strictly adhered to:
Touch Pad Touch Screen Dustbag Compartment
Power Socket for Handpiece
External LED Light Connection
(not available in Australia)
Fuse Housing
Power On/Off
Rocker Switch
Mains Power Connection
To Next Page
Loading...
