Berkeley 5SN Series User Manual

OWNER’S MANUAL
Shallow Well Jet Pumps/
Tank Systems
Installation/Operation/Parts
For further operating, installation, or maintenance assistance:
Call 1-800-363-PUMP (7867)
© 1998, PRINTED IN U.S.A. BE424 (Rev. 6/11/98)
Series “HN” and “SN”
1800 Courtney Park Drive East,
Unit 5-7, Mississauga, Ontario L5T 1W1

Berkeley 5SN Series Specifications

General

Series	5SN
Category	Water Pump
Weight	Varies by model
Voltage	115/230V, 208-230/460V
Phase	Single or Three
Shaft Material	Stainless Steel
Seal Type	Mechanical Seal

Summary

Safety

READ AND FOLLOW SAFETY INSTRUCTIONS!

General advice on understanding safety symbols and labels.

ELECTRICAL SAFETY

Warnings and precautions related to electrical hazards and voltage.

GENERAL SAFETY

General safety precautions for operating and servicing the pump.

Electrical

WIRING CONNECTIONS

Preparing to Start the Pump

PRIMING

Detailed steps for filling the pump and piping with water to prepare it for operation.

Troubleshooting

Motor will not run

Diagnosing and correcting issues when the motor fails to start.

Motor runs hot and overload kicks off

Identifying causes for motor overheating and overload tripping.

Motor runs but no water is delivered

Pump does not deliver water to full capacity

Pump delivers water but does not shut off or pump cycles too frequently

Air spurts from faucets