Berkeley 7SN Series - User Manual

OWNER’S MANUAL
Shallow Well Jet Pumps/
Tank Systems
Installation/Operation/Parts
For further operating, installation, or maintenance assistance:
Call 1-800-363-PUMP (7867)
© 1998, PRINTED IN U.S.A. BE424 (Rev. 6/11/98)
Series “HN” and “SN”
1800 Courtney Park Drive East,
Unit 5-7, Mississauga, Ontario L5T 1W1

Summary

Safety

Electrical Safety

Safety precautions for electrical components.

General Safety

General safety guidelines for operating the pump.

Berkeley Limited Warranty

General Terms and Conditions

Outlines the conditions and limitations of the product warranty.

Installation

Replacing an Old Pump

Step-by-step guide for removing and replacing an existing pump.

Well Point (Driven Point) Installation

Instructions for installing pumps using a driven point well system.

Cased Well Installation, 2” or Larger Casing

Procedures for installing pumps in cased wells.

Installation for Surface Water

Guidelines for installing pumps with surface water sources.

Discharge Pipe and Pressure Tank Connections

Pre-Charge Tank Connection

Details on connecting a pre-charged pressure tank to the pump.

Standard Tank Connection

Instructions for connecting a standard pressure tank system.

Electrical

Wiring Connections

Procedures for connecting the pump's electrical wiring.

Connection Procedure

Step-by-step guide for electrical hookup and grounding.

Preparing to Start the Pump

Priming

Essential steps for priming the pump before operation.

Repair Parts

Service Kits

Information on available service and overhaul kits for pump maintenance.

Troubleshooting

Berkeley 7SN Series Specifications