43
If you Have a Nano BTE with Earmold
You should wash your earmolds regularly. The
hearing instruments themselves must never be
washed or allowed to get wet!
· Handle your instruments over a soft surface
to avoid damage in case you drop them.
· Disconnect the earmold from
the hearing instrument by
grasping the end of the hook
rmly with one hand and
grasping the tubing rmly with
the other hand.
· Pull the tubing away from the earhook.
· Gently clean the earmold in warm soapy water.
· Rinse the earmold and allow it
to dry completely.
· Use an air puffer to remove
any remaining moisture in the
tubing.
· When re-attaching the earmold to the
instrument, it is important to position it correctly.
To Next Page
Loading...
