Bernafon ACRIVA 9 - Nano BTE Spira Flex Thin Tube Care

To Next Page

To Previous Page

If You Have a Nano BTE with Spira Flex Thin Tube

If you have the thin tube system, make sure that the

tube and dome are kept free of ear wax at all times.

· Grasp the adapter rmly

and disconnect the thin

tube from the instrument

by pulling it off.

· Use a soft dry cloth

or tissue to clean the

outside of the thin tube

and dome.

· To remove wax from the

thin tube, insert the cleaning wire at the connector

end. Push the wire all the way into the thin tube

until it comes out through the dome.

· Pull the cleaning wire out through the dome and

discard it.

· Reattach the thin tube connector to the adapter by

pushing the thin tube connector into the hearing

instrument adapter.

Other manuals for Bernafon ACRIVA 9