26
Wash the mold
Step 1
Make sure you are able to
identify which mold is for
which hearing aid before
disconnecting them from the
hearing aid.
Step 2
Disconnect the tube and mold
from the earhook. Hold the
earhook fi rmly, when pulling
off the tube. Otherwise the
hearing aid may be damaged.
Step 3
Wash the mold and tube using
mild soap. Rinse and dry
completely before reconnecting
to the hearing aid.
27
miniFit thin tube
Read the following pages if your hearing aid has a
miniFit thin tube with either a dome, Grip Tip, or
Micro Mold as earpiece.
miniFit is a thin tube that brings the sound into
your ear. The thin tube should only be used with an
earpiece attached. Use only parts designed for your
hearing aid.
Thin tube
Ear grip (optional)
To Next Page
Loading...
