Bernafon Viron 7 - Clean Micro Mold; Cleaning the Micro Mold and its vent

32
Customized earpieces for thin tube
Micro Molds are available in two different materials.
The earpieces are customized for your ear.
Micro Mold
Customized earpieces have a white wax fi lter
attached to the sound opening. ProWax is the fi lter
type to be used with these earpieces. To replace the
ProWax fi lter, see section “Replace ProWax fi lter”.
33
Clean Micro Mold
The Micro Mold should be cleaned regularly.
The Micro Mold has a white wax fi lter that must be
replaced when clogged, or if the hearing aid does not
sound normal.
ProWax fi lter
The vent is cleaned by pressing
the brush through the hole, twisting it slightly.
Vent
Important notice
Ensure you always use the same type of wax fi lter as
was originally supplied with the hearing aids. If you
are in doubt about the use or replacement of wax
fi lters, contact your hearing care professional.