Bernafon VN5 MNR T R - Features and Controls

32
Flight mode
When boarding an airplane or entering an area where
it is prohibited to radiate radio signals, e.g., during
ight, ight mode must be activated. It is only
necessary to activate ight mode on one hearing aid.
When ight mode is activated, only Bluetooth
®
is
turned off. The hearing aid will still be working.
To activate and
deactivate ight mode
press and hold the
push button (lower
part) for 7 seconds.
LED ight mode deactivated: The LED will turn
steady red for a few seconds, until the hearing aid
returns to its normal operating mode.
Pressing the button on one hearing aid will activate
ight mode on both hearing aids.
See overview “Sound and LED indications”.
Beep: The hearing aid plays
4 descending tones followed
by 4 tones to indicate that
ight mode is activated or
deactivated.
LED ight mode activated:
A long red blink followed by
green, red, red. The LED will
blink green, red, red a few
times. This conrms that
ight mode is activated.