Berner BHPC 150-1 - 4 Before You Start Using Your Pressure Washer; 4.1 Mounting Spray Lance Holders; 4.2 Mounting Hose Reel Handle; 4.3 Mounting Quick Coupling

BHPC 150-1 4-in-1 Lance
DE
EN
I
T
ES
FR
NL
DA
SV
FI
NO
33Original Instructions
PT
4 Before you start using your pressure
washer
4.1 Mounting of holders for
spray lance
Mount the holders for spray
lance on the machine.
4.2 Mounting of hose reel
handle
1. Click the hose reel handle
on to the trolley handle (no
screws).
4.3 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure to
fi t the fi lter will in-
validate the guar-
antee.
