How to fix skipped stitches on Bernette b64 AIRLOCK?
If your Bernette Sewing Machine is skipping stitches, here are some things to try: * Insert a new needle, as the current one may be bent or have a blunt point. * Tighten the needle set screw. * Ensure the needle is inserted correctly. * Change the type or size of the needle. * Check the threading. * Increase the presser foot pressure. * Use a high-quality thread.
What to do if the needle breaks on my Bernette b64 AIRLOCK?
If the needle breaks on your Bernette Sewing Machine, make sure that the needle is correctly inserted and that the needle set screw is tightened. Avoid pulling the fabric while sewing. If you are using heavy fabrics, try using a larger needle.
Why is the fabric puckering with my Bernette b64 AIRLOCK Sewing Machine?
If the fabric puckers when using your Bernette Sewing Machine, try these solutions: Check the setting of the differential feed. Loosen the thread tension. Check for any tangled or caught thread. Use a high-quality weight thread. Shorten the stitch length. Decrease the presser foot pressure, especially for lightweight fabrics.
How to improve fabric feed on Bernette b64 AIRLOCK Sewing Machine?
If the fabric does not feed well through your Bernette Sewing Machine, try these solutions: Lengthen the stitch length. Increase the presser foot pressure for heavyweight fabrics or decrease it for lightweight fabrics. Check the setting of the differential feed.
Why does fabric pile up when using my Bernette b64 AIRLOCK?
If the fabric is piling up when using your Bernette Sewing Machine, try lengthening the stitch length and checking the setting of the differential feed. Also, check for any tangled or caught thread. For thick layers of fabric, compress them with a conventional machine before sewing with the overlock.
What to do if my Bernette b64 AIRLOCK Sewing Machine does not turn on?
If your Bernette Sewing Machine does not operate, ensure that the machine is connected to a power source and switched on. Also, make sure that the hook cover is closed.
Why does the thread keep breaking on my Bernette b64 AIRLOCK Sewing Machine?
If the thread breaks while using your Bernette Sewing Machine, try the following: First, loosen the thread tension. Next, check the threading to ensure it's correct. Also, inspect for any tangled or caught thread. Make sure the needle is inserted correctly and consider inserting a new needle, as the current one may be bent or have a blunt point. Finally, use a high-quality thread.
What causes irregular stitches on a Bernette b64 AIRLOCK Sewing Machine?
If you're experiencing irregular stitches with your Bernette Sewing Machine, try balancing the thread tension. Also, check for any tangled or caught thread and ensure correct threading.
How to fix irregular trimming on Bernette b64 AIRLOCK Sewing Machine?
To address irregular trimming on your Bernette Sewing Machine, check the alignment of the knives. If necessary, replace one or both knives.
General| Brand | Bernette |
|---|---|
| Model | b64 AIRLOCK |
| Category | Sewing Machine |
| Language | English |
Learn how to correctly insert and replace sewing machine needles for optimal performance.
Step-by-step guide on how to safely remove and attach presser feet for different sewing operations.
To Next Page
