I
• Turn power switch to «0» when making any adjustments in the needle area, such as
threading the needle or changing the needle or the presser foot.
• Never use damaged needles.
• Always use the original bernette stitch plate. The wrong stitch plate can cause needle
breakage.
• To disconnect, turn power switch to "0"and then remove the plug from the outlet.
Always pull on the plug and not the cable.
• Disconnect the plug before removing or opening the covers, oiling the machine or
performing any cleaning or maintenance work described in this instruction manual.
• This machine is double-insulated (except for USA, Canada and Japan). Use only genuine
replacement parts. See instructions for Servicing of double-insulated products.
Important information
Availability of the instruction manual
The short manual is part of the machine.
• Keep the short manual of the machine in a suitable place near the machine and have it
ready for reference.
• A detailed instruction manual can be downloaded from www.bernette.com.
• When passing on the machine to a third party, enclose the short manual of the
machine.
Proper use
Your bernette machine is conceived and designed for private household use. It is
intended for sewing fabrics and other materials as described in this instruction manual.
Any other use is not considered appropriate. BERNINA assumes no liability concerning
consequences resulting from an inappropriate usage.
Maintenance of double-insulated products
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product nor should a
means for grounded be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system and should only be done by
qualified service personnel. Only original spare parts should be used for service and
repairs. A double-insulated product is marked with the words: «Double-Insulation» or
«double-insulated».
The symbol may also be marked on the product.
To Next Page
Loading...
