• To disconnect, turn power switch to "0"and then remove the plug from the outlet. Do not unplug
by pulling the cord, instead grasp the plug to pull it from the outlet.
• Disconnect the plug before removing or opening the covers, oiling the machine or performing any
cleaning or maintenance work described in this instruction manual.
• This machine is double-insulated (except for USA, Canada and Japan). Use only original
replacement parts. Note the information on maintaining double-insulated products.
• The sound pressure level under normal conditions is less than 70 dB (A).
Important Information
Availability of the Instruction Manual
The instruction manual is supplied with the machine.
Keep the instruction manual safe at a suitable place near the machine to have it at hand in case
that you need to look up something.
If you pass the machine to a third party, always include the instruction manual.
Proper Use
Your bernette machine is conceived and designed for private household use. It is intended for
sewing fabrics and other materials as described in this instruction manual. Any other use is not
considered proper. bernette assumes no liability concerning consequences resulting from an
inappropriate usage.
Servicing of Double-insulated Products
In a double-insulated product two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product nor should a means for grounded be
added to the product. Servicing a double-insulated product requires extreme care and knowledge
of the system and should only be done by qualified service personnel. Replacement parts for a
double-insulated product must be identical to the original parts in the product. A double-insulated
product is marked with the words: «Double-Insulation» or «double-insulated».
......... The symbol may also be marked on the product.
Environmental Protection
BERNINA International AG is committed to environmental protection. We strive to minimize the environmental
impact of our products by continuously improving product design and our technology of manufacturing.
The machine is labeled with the symbol of the crossed-out wastebin. This means that the machine must not
be disposed of with the household waste when the machine is no longer needed. Improper disposal can
result in dangerous substances getting into the groundwater and thus into our food chain, damaging our
health.
The machine must be returned free of charge to a nearby collection point for waste electrical and electronic
equipment or to a collection point for the reuse of the machine. Information on the collection points can be
obtained from your local administration. When purchasing a new machine, the dealer is obliged to take back
the old machine free of charge and dispose of it properly.
If the machine contains personal data, you are responsible for deleting the data yourself before returning the
machine.
II
To Next Page
Loading...
