What to do if my Bernette b48 FUNLOCK has stitch skip?
To fix stitch skipping, first insert new needles, as the current ones might be bent or have a blunt point. Use only ELx705 overlock needles. Ensure the needle set screw is tightened and the needles are correctly inserted. If the issue persists, change the type or size of needles, check the threading, increase presser foot pressure, and use a high-quality thread.
Why Bernette b48 FUNLOCK Sewing Machine fabric does not feed well?
If the fabric doesn't feed well, try the following: increase the stitch length. For heavy weight fabric, increase the presser foot pressure. For light weight fabric, decrease the presser foot pressure.
What to do if my Bernette b48 FUNLOCK has irregular stitches?
If you're experiencing irregular stitches, try balancing the thread tension and check for any tangled or caught thread. Also, check the threading of your machine.
Why my Bernette b48 FUNLOCK Sewing Machine does not operate?
If the machine doesn't operate, connect it to a power source, switch it on, and ensure that the looper cover is closed.
Why does my Bernette Sewing Machine thread keep breaking?
The thread may break due to several reasons. First, ensure that the machine is correctly threaded and that there is no tangled or caught thread. Second, the needle may be bent or have a blunt point, so insert a new, high-quality needle. Finally, the thread tension might be too tight, so try loosening it.
What to do if my Bernette Sewing Machine needle breaks?
If the needle breaks, make sure you insert it correctly and avoid pulling the fabric while sewing. Also, ensure that the needle set screw is tightened and that you are using a larger needle for heavy fabrics if needed.
What to do if Bernette b48 FUNLOCK Sewing Machine fabric puckers?
If the fabric puckers, try these steps: loosen the thread tension and check for any tangled or caught thread. Use a high-quality, lightweight thread, shorten the stitch length, and decrease the presser foot pressure, especially for lightweight fabrics.
What to do if my Bernette Sewing Machine fabric jams?
If the fabric jams, close the looper cover before sewing and check for any tangled or caught thread. For thick layers of fabric, compress them with a conventional machine before sewing with the overlock.
How to fix irregular trimming on my Bernette b48 FUNLOCK?
To address irregular trimming, check the alignment of the knives and replace one or both knives if necessary.
General| Brand | Bernette |
|---|---|
| Model | b48 FUNLOCK |
| Category | Sewing Machine |
| Language | English |
Identifies and labels all parts of the sewing machine for user reference.
Lists and describes standard accessories provided with the machine.
Provides essential details and compatibility for sewing machine needles.
Instructions on how to turn the sewing machine on and off using the power switch.
Explains how to use the foot controller to operate the sewing machine's speed.
Guide on properly extending and positioning the retractable thread stand for sewing.
Instructions for using the spool net to prevent thread from spilling off the cone.
Guidance on fitting the spool cap onto a regular thread spool for stability.
Instructions for setting up and sewing a standard overlock stitch on the machine.
Steps to set up the machine for sewing a rolled hem, focusing on the seam width finger.
Explains correct needle placement for various stitch types and needle configurations.
Detailed guide on how to safely remove sewing machine needles.
Step-by-step instructions for correctly inserting new sewing machine needles.
Defines abbreviations used throughout the manual for machine settings and components.
Visual instructions for threading the machine for overlock stitches using color codes.
Visual guide for threading overlock and chain stitches, including safety stitch options.
Visual instructions for threading the machine for coverstitches, indicating color-coded thread paths.
Detailed steps for threading the right coverstitch needle with blue indicators.
Guide for threading the center coverstitch/chainstitch needle using green thread guides.
Instructions for threading the left coverstitch needle using yellow thread guides.
Explains the tie-on method for efficiently changing threads without re-threading the entire machine.
Details on using the stitch length dial to set the desired stitch size for various fabrics.
How to alter seam width by repositioning the needles on the machine.
Instructions on using the cutting width dial to fine-tune seam width and fabric trimming.
Guidance on adjusting the presser foot pressure for optimal sewing on different fabric types.
Instructions for using differential feed to create gathered overlock effects on fabrics.
How to use differential feed for stretch overlock effects, ensuring fabric doesn't shift.
Notes on chaining off, test samples, and using needle location marks for accurate sewing.
Instructions and settings for sewing a 2-thread chainstitch, including tension balancing.
Details on preparing the machine for 2-thread chainstitch, including knife and looper settings.
Guide to sewing a 2-thread wrapped overlock stitch, including tension settings.
Settings and guidance for sewing a narrow 2-thread overlock stitch.
Instructions for sewing a wide 2-thread overlock stitch, including tension balancing.
Details on sewing a narrow 2-thread flatlock stitch, including tension adjustments.
How to sew a wide 2-thread flatlock stitch, focusing on thread tension balance.
Settings and thread tension guidance for sewing a narrow 3-thread overlock stitch.
Instructions for sewing a wide 3-thread overlock stitch, including balancing thread tensions.
Steps for sewing a narrow 3-thread flatlock stitch, with tension balancing tips.
Guidance on sewing a wide 3-thread flatlock stitch and achieving flat results.
Settings for sewing a narrow 2-thread overlock and chain stitch, including tension adjustments.
Guide to sewing a wide 2-thread overlock and chain stitch, with tips on balancing thread tensions.
Instructions for sewing a narrow 3-thread overlock and chain stitch, including tension balancing.
Guidance on sewing a wide 3-thread overlock and chain stitch and balancing thread tensions.
Steps to prepare the machine for coverstitching, including needle and looper setup.
Tips for starting, sewing, and finishing coverstitch seams, including securing the end.
Settings and tension balancing for sewing a narrow 3-thread coverstitch.
Guide to sewing a wide 3-thread coverstitch, focusing on thread tension for flat results.
Tips for achieving fine rolled hems, including thread chain security and stitch width.
Guide to creating decorative flatlock seams by adjusting tensions and flattening the fabric.
How to sew decorative flatlock seams without trimming the fabric edge.
Tips for flatlocking, including prominent threads and ladder stitch creation.
Instructions for sewing an overlock blind hem, suitable for knitwear for a durable, invisible finish.
Guide to sewing decorative pin tucks on fabric before garment construction.
Methods for sewing neat square corners on fabric, covering both outside and inside corners.
Methods for sewing neat square corners on fabric, covering both outside and inside corners.
Instructions for creating braided cords by chaining off filler cords for seam reinforcement.
Steps to clean the sewing machine, focusing on lint removal from critical areas.
Guidance on where and how to oil the sewing machine's moving parts for optimal performance.
Details on removing and replacing the snap-on type presser foot for easy accessory changes.
Lists and describes optional presser feet designed for overlock machines.
Lists and describes optional presser feet specifically for coverstitch functions.
A guide to common sewing problems and their solutions, including causes and remedies.
A chart providing recommendations for fabric types, threads, and needles for optimal sewing results.
A summary of the machine's technical specifications, including stitch formations, dimensions, and weight.
To Next Page
