3
TABLE OF CONTENTS
NAME OF PARTS
Details of machine 7
ACCESSORIES
Standard 9
Needle Information 9
HOW TO OPEN LOOPER COVER
Principal Parts behind the Looper Cover 10
PREPARATION TO SEWING
Power Switch 10
Foot Controller 10
Cut-offs Bin 11
PREPARATION FOR THREADING
Setting up the Retractable thread stand 12
Spool net 12
Spool Cap 12
HOW TO DISENGAGE UPPER KNIFE
UPPER LOOPER CONVERTER (ULC)
Use the upper looper converter 14
Disengage to upper looper 14
STANDARD OVERLOCK AND ROLLED HEM
STITCHING
Sew Standard Overlock 14
Sew Rolled Hem 15
HOW TO REMOVE AND INSERT NEEDLES
Needle Position 15
To Remove Needle(s) 16
To Insert Needle(s) 16
SELECTION OF STITCHES
THREADING THE MACHINE
List of abbreviations 19
Threading Chart Summary 20
Threading Diagram Overlock Stitches 21
Threading Diagram Overlock and Chainstitches 21
Threading Diagram Coverstitches 21
Threading the Upper Looper (Blue) 22
Threading the Lower Looper (Red) 23
Threading the Chainstitch/
Coverstitch Looper (Violet) 25
Threading the Overlock Right Needle (Green) 27
Threading the Overlock Left Needle (Yellow) 28
Threading the Coverstitch Needles 30
HOW TO CHANGE THREADS
Tie on method 35
HOW TO ADJUST THE STITCH LENGTH
Stitch lenght dial 36
HOW TO ADJUST THE SEAM WIDTH
Width adjustment by changing needle position 36
Cutting cutting width dial 36
HOW TO ADJUST THE PRESSER FOOT PRES-
SURE
Presser foot pressure wheel 37
DIFFERENTIAL FEED
Gathered Overlock (1–2.0) 38
Stretch Overlock (1–0.6) 39
CHAINING OFF AND TEST SEWING
Information 40
HOW TO SEW A Chainstitch
2-Thread Chainstitch 41
Machine set up 42
HOW TO SEW A OVERLOCK STITCH
2-Thread Wrapped Overlock 43
2-Thread Overlock 44
2-Thread Flatlock 45
3-Thread Overlock 46
3-Thread Flatlock 47
3-Thread Super Stretch 48
To Next Page
Loading...
