Bernette b48 FUNLOCK - Upper Looper Converter (ULC); Standard Overlock and Rolled Hem Stitching; Sew Standard Overlock

14
UPPER LOOPER CONVERTER
(ULC)
When not threading the upper looper, the upper looper
converter must be engaged into the upper looper eye.
Attach the Upper Looper Converter
– To engage the upper looper converter, insert
the sharp part (1) into the eye of upper looper.
– A raised point located in the trough of upper
looper converter must be inserted and fixed (2)
in the eye of the upper looper converter.
1
2
3
1
2
3
CAUTION:
Be sure to turn off power switch.
Remove the Upper Looper Converter
When using the upper looper, the upper looper
converter must be disengaged.
– To disengage the upper looper converter, raise
the handle (3) of upper looper according to
picture.
STANDARD OVERLOCK AND
ROLLED HEM STITCHING
Sew Standard Overlock
Set seam width finger knob to "N" to move seam width
finger to standard overlock sewing position.
R
N
R
N
PLEASE NOTE:
Be sure to push seam width finger knob as far as
it will go in the direction of setting "N".