Bernette b48 FUNLOCK - Left Coverstitch Needle (Yellow)

 33
2
2
1
8
4
5
7
6
3
2
10
1
9
10
– The position of the thread must be behind the
thread guide.
– Draw about 10 cm (4 inches) of thread through
needle eye towards the rear of machine.
– Place the thread to the back, under the presser
foot.
– Thread the eye of the center needle (10).
PLEASE NOTE:
Use of tweezers in the looper cover will make
needle eye threading easy.
– Pass thread from back to the front through the
thread guide (1).
• Left Coverstitch Needle (Yellow)
(C On Needle Clamp)
– Raise the presser foot to open the tension
discs.
– Thread the left coverstitch as indicated
(1)– (10).
2
2
1
8
4
5
7
6
3
2
10
1
9
10
CAUTION:
Be sure to turn off power switch.