Bernina 009DCC - Attaching Binding with Serger; Cover Stitch Binding Option; Chain Stitch Binding Option

MASTERING YOUR BERNINA
®
1/04/02 009DCC/10
BERNINA
®
009DCC
MASTERING
YOUR
BERNINA
®
ATTACHING BINDING
Fabric: Pre-quilted fabric, 3” x 6”
20” of wide prefolded bias binding
Needle: 80/12 Universal
Thread: 2 or 3 cones of serger thread
Presser Foot: Coverstitch
Cover Stitch Option:
Owner’s manual pg.___
• Following the instructions in the manual (page ___), thread the serger for cover stitch.
• Wrap the bias binding around one 6” side of the quilted fabric; secure in place with 505 temporary
spray adhesive.
• Place the fabric under the needles with the unstitched edge of the binding even with the inside of the
left floating toe, with the quilted fabric to the left.
• Coverstitch the binding to the quilted fabric.
Chain Stitch Option:
Owner’s manual pg.___
• Following the instructions in the manual (page ___), thread the serger for cover stitch.
• Wrap the bias binding around one 6” side of the quilted fabric; secure in place with 505 temporary
spray adhesive.
• Place the fabric under the needles with the unstitched edge of the binding even with the inside of the
right floating toe, with the quilted fabric to the right.
• Coverstitch the binding to the quilted fabric.
• Trim and mount the sample.