Bernina 009DCC - Cover Stitch Hem for Woven Fabric

MASTERING YOUR BERNINA
®
1/04/02 009DCC/6
BERNINA
®
009DCC
MASTERING
YOUR
BERNINA
®
Owner’s manual pg.___
• Following the instructions in the manual (page ___), thread the serger for cover stitch
using thread colors to match the color-coded threading path on the serger (use blue
for purple markings).
• Fold up a 2” hem along the 6” edge of the fabric. Glue stick or pin in place.
• Using the markings on the stitch plate as a guide, place the fabric under the needles
with the fold to the right of the presser foot, with the right side of the fabric up and the
hem/wrong side down.
• Coverstitch the hem in place.
• Trim and mount the sample.
COVER STITCH HEM
Woven Fabric
Fabric: Medium weight cotton, 5” x 6”
Needle: 80/12 Universal
Thread: 3 cones of serger thread
Presser Foot: Coverstitch