Need help?Do you have a question about the Bernina 1030 and is the answer not in the manual?
General| Stitch Width | 5.5 mm |
|---|---|
| Stitch Length | 4 mm |
| Free Arm | Yes |
| Built-in Needle Threader | No |
| Type | Mechanical |
| Bobbin Type | Front-loading |
| Stitch Options | Straight, Zigzag |
| Presser Feet | Standard |
Covers general caution, danger, and warning notices for safe operation.
Identifies and labels the various external parts of the sewing machine.
Step-by-step instructions for safely removing machine covers for access.
Procedures for cleaning lint and applying oil to machine internal and external parts.
Adjusting the hook position and timing for correct stitch formation and operation.
How to check and adjust the bobbin thread tension for proper stitch balance.
How to check and adjust the top thread tension for proper stitch balance.
Lists common sewing issues and their potential causes for diagnosis.
Details causes and solutions for uneven or defective stitches encountered during sewing.
Addresses issues related to upper and lower thread breakage during machine operation.
Troubleshooting stitch length variations, feed problems, and skipped stitches.
To Next Page
