Need help?Do you have a question about the Bernina 530-2 and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Max Sewing Speed | 900 stitches per minute |
| Number of Stitches | 148 |
| Stitch Options | Utility, Decorative, Quilting |
| Needle Positions | 11 |
| Max Stitch Length | 5 mm |
| Max Stitch Width | 5.5 mm |
| Free Arm | Yes |
Instructions on how to safely remove and replace the sewing machine.
Details the warranty period, coverage, and exclusions for the sewing machine.
Step-by-step guide on how to remove the bobbin case from the shuttle.
Instructions for winding thread onto the bobbin for the bottom thread.
Procedure for inserting the bobbin into its case and threading the bobbin.
Guidance on correctly placing the bobbin case back into the shuttle.
Instructions for correctly inserting and securing the sewing machine needle.
Guidance on choosing the appropriate needle and thread for different sewing tasks.
Detailed steps for threading the upper thread through the machine.
Procedure to bring the bobbin thread up to the needle area.
Explanation of the thread tension mechanism and its adjustment.
Instructions on how to attach and secure the slide-on sewing table.
Steps for cleaning lint and debris from the sewing machine.
Guidance on where and how to apply oil to ensure smooth machine operation.
Key points and warnings regarding proper oiling of the sewing machine motor.
How to perform plain stitching using different presser feet.
Instructions for easily changing the presser foot on the machine.
Procedure for lowering the feed dog for specific sewing operations like darning.
Specific steps and settings required for executing a plain stitch.
How to sew forward/backward and adjust stitch length for different needs.
Steps to safely remove the sewn item from the machine.
Guidance on performing cross-wise darning using the patented hopper foot.
Instructions on using the darning attachment for repairing stockings.
General instructions and settings for performing zigzag stitches.
How to adjust the width of the zigzag stitch using the control knob.
Explanation of the needle position adjustment for zigzag stitching.
Instructions for creating shell roll hems using a specific hemmer attachment.
Method for sewing a standard buttonhole, including special threading.
Specific threading adjustments for the bottom thread for automatic buttonholes.
Instructions for creating buttonholes with a cord inlay.
Technique for sewing a complete buttonhole without stopping the machine.
Guide for sewing raised buttonholes with specific thread tension settings.
Procedure to reset the machine from automatic buttonhole mode to normal sewing.
Manual method for sewing buttonholes without the automatic device.
Detailed steps for manually sewing buttonholes on the machine.
Introduction to creating ornamental stitches using the zigzag function.
Overview of how stitch length, width, and location create ornamental patterns.
How to set up the machine for automatic ornamental stitch control.
Creating ornamental stitches using a single needle and variable settings.
Techniques for ornamental stitches using a double needle.
Configuring the machine for blindstitching using the ordinary zigzag stitch.
Steps to set up the machine for automatic blindstitch cam operation.
Procedure for threading both top threads for pin-tucking operations.
Explanation of how pin-tucks are formed using the bottom and top threads.
Creating parallel ornamental stitches using a double needle.
General guide to identifying and resolving common sewing machine issues.
Troubleshooting steps for a jammed or blocked shuttle race.
Common causes and solutions for the top thread breaking during sewing.
Identifying and fixing issues related to the breakage of the bottom thread.
Diagnosing and correcting common problems that result in faulty stitches.
Reasons for needle breakage and how to prevent it.
Troubleshooting tips for a sewing machine that is operating slowly.
Causes of fabric puckering and methods to avoid it.
To Next Page
