What to do if my Bernina 540 Sewing Machine isn't detecting the BSR presser foot #42?
If the BSR presser foot #42 is not detected by your Bernina Sewing Machine, the lens may be dirty; clean it with a soft, slightly damp cloth. Also, ensure the BSR cable is correctly inserted vertically until you feel it click into place.
What to do if I get an error during a software update on my Bernina 540 Sewing Machine?
If you encounter an error during a software update on your Bernina Sewing Machine, it may be because the USB stick is not recognized; use a BERNINA USB stick. If the update process is blocked with an inactive hourglass on the display, remove the USB stick. If the date of the software update cannot be found, follow the instruction on the display.
How to fix error during software update on Bernina 540 Sewing Machine?
If you encounter an error during a software update on your Bernina sewing machine: * If the USB stick is not recognized, use a BERNINA USB stick. * If the update process is blocked and the hourglass on the display is inactive, remove the USB stick. * If the date of the software update cannot be found, switch the machine off.
Why does the upper thread keep breaking on my Bernina 540?
If the upper thread breaks on your Bernina Sewing Machine, it could be due to several reasons. The needle and thread combination might be incorrect, so match the needle with the thread size. The upper thread might be too tight, in which case you should reduce the upper thread tension. Other potential causes include incorrect threading (rethread the machine) or poor quality thread (use quality thread). Also, the thread may be caught in the area of the thread take-up lever (remove the thread remnants). If the stitch plate or the hook tip is damaged, contact the nearest specialized BERNINA dealer to have the damages repaired.
What to do if my Bernina 540 doesn't start?
If your Bernina Sewing Machine doesn't start, it could be due to an unfavorable room temperature; place the machine in a warm room one hour before use. Also, ensure the machine is properly connected and switched on. If the machine is damaged, contact the specialized BERNINA dealer.
Why aren't the sewing light and free arm light working on my Bernina Sewing Machine?
If neither the sewing light nor the light on the free arm lights up on your Bernina Sewing Machine, check the Setup Program to ensure they are activated. If the sewing light is defect, contact the specialized BERNINA dealer. The same applies if the upper thread indicator is defect.
What to do if the upper thread indicator doesn't react on Bernina 540?
If the upper thread indicator on your Bernina sewing machine doesn't react: * Check the settings in the Setup Program; activate it in the Setup Program. * If the upper thread indicator is defective, contact the specialized BERNINA dealer.
Why is the bobbin thread indicator not reacting on my Bernina 540 Sewing Machine?
If the bobbin thread indicator isn't reacting on your Bernina sewing machine: * Check the settings in the Setup Program; activate it in the Setup Program. * If the bobbin thread indicator is defective, contact the specialized BERNINA dealer.
Why is the stitch width not adjustable on my Bernina 540 Sewing Machine?
If the stitch width is not adjustable on your Bernina Sewing Machine, it could be because the selected needle and stitch plate cannot be used in combination. Try replacing the needle or the stitch plate.
How to troubleshoot faulty stitching on my Bernina 540?
Faulty stitching on your Bernina Sewing Machine can be caused by thread remnants between the thread tension discs; fold a piece of thin material and slide the folded edge (not the raw edges) between the thread tension discs to remove them. Incorrect threading (rethread the machine) or thread remnants below the bobbin case spring (remove the thread remnants under the spring) can also lead to this issue.
General| Sewing Speed | 1000 stitches per minute |
|---|---|
| Hook System | BERNINA Hook |
| Needle Positions | 11 |
| Memory | Yes |
| Display | Color touch screen |
| LED Sewing Lights | Yes |
| Stitch Length | 6 mm |
| Start/Stop Button | Yes |
| Speed Control | Yes |
| Foot Pressure Adjustment | Yes |
| Bobbin Winding While Sewing | Yes |
| Presser Feet | Included |
| USB Port | Yes |
| Automatic Thread Cutter | Yes |
| Bobbin System | Front-loading |
To Next Page
