Bernina 540 - Threading the Double Needle

Sewing preparation
42
> Pull the loop of thread (14) to the rear until the end of the thread is pulled through the needle.
14
> Pull the thread below the presser foot and through to the thread cutter (15), and cut it.
15
Threading the double needle
Prerequisite:
• The double needle is inserted.
> Guide the first thread in direction of the arrow on the right side of the tension disc (1).
> Guide the second thread in direction of the arrow on the left side of the tension disc (1).
1
> Guide the first and the second thread to the thread guide above the needle.
> Thread the first thread manually into the right needle.