My BERNINA
20
Illustration Name Purpose
Height compensating tool To level an angled position of
the presser foot sole when
sliding over thick seams.
Selection of needles For any common applications.
Screwdriver red (slot) To loosen and tighten slotted
screws.
Brush To clean the feed dog and the
looper area.
Sewing machine oil To oil the machine.
Power cable To connect the machine with the
power supply system.
Foot control To start and stop the machine.
To control the sewing speed.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
To Next Page
Loading...
