Bernina 540 - Connection and Switching on; Connecting the Foot Control; Connecting the Machine; Attaching the Knee Lifter of the Free Hand System

Sewing preparation
29
2.2 Connection and Switching on
Connecting the foot control
> Unwind the cable of the foot control to the desired length.
> Insert the cable of the foot control into the foot control connection.
Connecting the machine
> Insert the power cable into the power cord connection.
> Insert the power cable into the power cord connection.
Attaching the knee lifter of the Free Hand System
The lateral position of the knee lifter can be adjusted by your local BERNINA Dealer if required.
> Insert the knee lifter into the opening at the front side of the machine.