Bernina 540 - Changing the Stitch Type; Altering the Stitch Density; Checking the Size and the Position of the Embroidery Motif

Creative embroidering
144
Changing the stitch type
If the satin stitches are too long, they can be changed to step stitches.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
1 2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Adjust the desired stitch length (2) with the icons «-» or «+».
Altering the stitch density
If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
> Adjust the desired stitch density (1) with the icons «-» or «+».
1
Checking the size and the position of the embroidery motif
It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.