Bernina 540 - Deleting Motifs on the BERNINA USB Stick; Calibrating the Buttonhole Foot No. 3 A

Setup Program
60
> Touch the icon «Confirm» to delete all data from the personal memory.
> Touch the icon «Delete personal embroidery motifs».
> Touch the icon «Confirm» to delete all embroidery motifs from the personal memory.
Deleting motifs on the BERNINA USB Stick
When motifs which won't be needed anymore are saved on the BERNINA USB Stick (Optional accessory), the
stick can be connected to the machine and the data can be deleted.
> Insert the BERNINA USB Stick (Optional accessory) into the den USB port of the machine.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Default settings».
> Touch the icon «Delete data from USB Stick».
> Touch the icon «Confirm» to delete all data on the BERNINA USB Stick (optional accessory).
Calibrating the Buttonhole foot No. 3A
The Buttonhole foot with slide No. 3A and the machine are synchronized with each other and should only be
used together.
Prerequisite:
• The Buttonhole foot No. 3A is attached.
• The needle is not threaded.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».