Bernina 540 - Lubricating the Machine

Setup Program
63
Lubricating the machine
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
NOTICE
Lubricating the hook
Too much oil can pollute the fabric and the thread.
> After lubricating, sew/embroider a test piece first.
The Setup Program provides animations how to oil the machine. In chapter «Maintencance and cleaning»
there are more illustrated step by step instructions Lubricating the machine. Always use BERNINA oil to
lubricate.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Lubricate the machine».
> Lubricate the machine according to the instructions on the display.