Bernina 540 - Altering the Embroidery Motif Size Proportionally; Altering the Embroidery Motif Size Disproportionally

Creative embroidering
142
> Touch the icon «i»-Dialog.
> Touch the icon «Rotate the motif».
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the right to rotate the
embroidery motif clockwise.
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to the left to rotate the
embroidery motif counter-clockwise.
> Touch the icon «Rotate the motif +90°» to rotate the embroidery motif in 90°-steps.
Altering the embroidery motif size proportionally
Enlargements or reductions of the motif size up to maximum 20% achieve the best results.
If the motif size is to be altered by more than 20%, the motif should be adapted in a separate
embroidery software and then reloaded onto the machine.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Alter the embroidery size».
> To change the embroidery motif size proportionally, the icon «Retain proportions» must have a white
frame.
Only touch the icon «
Retain proportions» when the icon does not have a white frame.
– The icon «Retain proportions» has a white frame.
> Turn the «Upper/Lower Multifunction knob» to the right to scale up the embroidery motif proportionally.
> Turn the «Upper/Lower Multifunction knob» to the left to downsize the embroidery motif proportionally.
Altering the embroidery motif size disproportionally
Enlargements or reductions of the motif size up to maximum 20% achieve the best results.
If the motif size is to be altered by more than 20%, the motif should be adapted in a separate
embroidery software and then reloaded onto the machine.
> Select an embroidery motif.