Bernina 540 - Edgestitching Using the Seam Guide (Optional Accessory); Sewing Hem Edges

Practical stitches
91
6.16 Edgestitching using the seam guide (optional accessory)
When sewing parallel wider lines, it is recommended to guide the seam guide (optional accessory) along a
sewn line.
> Attach the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole of the presser foot.
> Adjust the width as desired.
> Tighten the screw.
> Guide the folded edge along the seam guide.
5/8
5/8
5
/8
1
25 15 15
15
75
75
6.17 Sewing hem edges
When using the Blindstitch foot No. 5 (optional accessory), it is recommended to select a needle position far
left or far right. When using the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C (optional
accessory) all needle positions are possible.
> Attach the Blindstitch foot No. 5 (optional accessory) or the Reverse pattern foot No. 1C or the Edge
stitch foot No. 10/10C (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Place the inside upper edge right against the guide of the Blindstitch foot.
> Select the needle position far right to sew along the upper edge.
5/8
5/
85/8
1
25 15 15
15
75
75