Need help?Do you have a question about the Bernina 732 and is the answer not in the manual?
General| Brand | Bernina |
|---|---|
| Model | 732 |
| Category | Sewing Machine |
| Language | English |
Details the duration of the warranty for the sewing machine and motor.
Guidance on motor lubrication and carbon brush maintenance.
Steps for accessing and removing the bobbin case.
Instructions for winding thread onto the bobbin.
How to insert and secure the sewing needle.
Step-by-step guide from reel to needle.
Procedure for bringing the under thread to the top.
How to attach the slide-on table.
Procedure for lowering the feed dog for darning.
Explanation of the integrated thread cutter.
Steps to remove lint and fluff.
Where and how to apply oil.
How to change presser feet quickly.
Settings and steps for plain stitch sewing.
How to set stitch length for forward/backward sewing.
Safely removing sewn material.
How to darn household textiles.
Using the darning attachment for socks.
Initial step for making a felled seam.
Attaching and using the hemmer.
How to use the gathering foot.
Using the edger for edge stitching and quilting.
Guidance on using the zipper foot and needle position.
How to set the stitch width using the adjustment knob.
Using the lever for needle position (center, right, left).
Machine adjustments and thread recommendations for zigzag.
Creating elastic seams for repairs.
Methods for sewing seams on ordinary tricot.
How to attach lace using zigzag.
Instructions for using the roll hemmer.
How to create scalloped hems.
Using cords with zigzag stitches.
How to use the ruffler.
Step-by-step guide for a standard buttonhole.
Detailed sequence for manual buttonhole creation.
Continuous buttonhole sewing method.
Modifying stitch feed for buttonholes and ornamental stitches.
Method for sewing buttonholes with cord.
Technique for raised buttonholes with tension.
Steps for sewing buttons securely.
Method for darning socks.
Sewing cut-outs for decorative effect.
Using the zigzag device for ornamental patterns.
Using the control for stitch length.
Switching between automatic and zigzag modes.
How the indicator shows stitch progress.
Machine settings for regular blindstitching.
Machine settings for cam-based blindstitching.
Setting up the machine and attachments.
Threading two upper threads.
How pintucks are formed.
Decorative stitches with a double needle.
Creating hemstitch effects using a single needle.
Using a double needle for hemstitching.
Two ways to embroider initials.
Machine and accessory setup for eyelet embroidery.
Basic checks and common causes.
Identifying why threads break.
Troubleshooting these specific issues.
Reasons for under thread issues.
Problems with missing stitches or needle breakage.
Reasons for needle breakage.
Diagnosing and fixing seam problems.
Addressing slow motor performance.
Advice on protecting the presser foot.
To Next Page
