Name: Bernina deco 330
Brand: Bernina
Rating: 5 (1 reviews)

Other manuals for Bernina deco 330

Manual136 pages

Questions and Answers:

B
Barry Cole MDJul 28, 2025
Why is my Bernina deco 330 Sewing Machine noisy and the needle thread breaks?
- E
  eatonjohnJul 29, 2025
  If your Bernina Sewing Machine is noisy and the needle thread breaks, it could be due to several reasons: threads caught in the hook mechanism, the needle thread not being threaded properly, the needle thread tension being too tight, the needle being bent or blunt, the needle being inserted incorrectly, or the needle thread not being set in the thread holder when starting the machine.
J
Julie KnappAug 2, 2025
What to do if the visual touch screen is not clear and skipped stitches on Bernina deco 330?
- M
  Mark TapiaAug 2, 2025
  If the Visual Touch Screen of your Bernina Sewing Machine is not clear and it skips stitches, it could be due to several reasons. The screen contrast may not be adjusted correctly or has faded due to continuous use. The needle may be inserted incorrectly, bent, or blunt, so replace the needle. The needle thread may not be threaded properly, or a defective needle is being used. Also, check if the embroidery hoop is set properly and the fabric is tightly pulled. Finally, ensure a stabilizer is being used.
P
pamelagarciaAug 7, 2025
Why does the bobbin thread break on my Bernina deco 330 Sewing Machine?
- S
  Scott GutierrezAug 7, 2025
  If the bobbin thread breaks in your Bernina Sewing Machine, it could be because the bobbin thread is not threaded properly in the bobbin holder, or lint has collected in the bobbin holder. If the bobbin is damaged and doesn't turn smoothly, replace the bobbin.
E
Erica BrownAug 12, 2025
What to do if my Bernina deco 330 makes abnormal noise and patterns are distorted?
- S
  Sharon MckayAug 12, 2025
  If your Bernina Sewing Machine is making abnormal noises and the patterns are distorted, it could be due to several reasons. Check if something is caught between the carriage and the arm; if so, remove the object. Ensure that the fabric is not caught or pulled when sewing embroidery; if it is, stop the machine and free the fabric. Also, cut any extra needle thread on the wrong side of the fabric.