Need help?Do you have a question about the Bernina L450 and is the answer not in the manual?
General| Type | Overlocker |
|---|---|
| Speed | Up to 1200 stitches per minute |
| Differential Feed | Yes |
| Free Arm | Yes |
| Color-Coded Threading | Yes |
| Lighting | LED |
| Stitch Length | 0.8 to 4 mm |
| Number of Threads | 3 or 4 |
General precautions and important information to follow before using the machine.
Critical safety warnings regarding electrical shock, radiation, and immediate hazards.
Important safety notices concerning burns, fire, electric shock, and injury prevention.
Instructions for connecting the foot control, power cord, and attaching the cut-offs bin for operation.
Introduces the main control elements of the machine, including power, looper cover, and sewing table.
How to adjust the stitch length and cutting width for various sewing needs.
Adjusting the mtc thread control and presser foot pressure for fine-tuning stitch quality.
How to adjust the differential feed for gathering or stretching fabric effects.
Guidelines for performing a test sewing to check stitch formation and optimize settings.
How to adjust thread tensions for balanced stitch formation on the overlocker.
Procedures for replacing the upper knife and routine cleaning and oiling of the machine.
Common problems, their causes, solutions, and corresponding page references for troubleshooting.
To Next Page
