What to do if my Bernina Sewing Machine is skipping stitches?
If your Bernina Sewing Machine is skipping stitches, the needles may be bent or blunt, in which case you should replace them. Ensure you are using the correct needles (system 130/705H). Also, the presser foot pressure might be too low; try increasing it.
Why does the thread keep breaking on my Bernina L220 Sewing Machine?
If the thread breaks while using your Bernina Sewing Machine, several factors could be at play. First, the thread tension may be too tight; try reducing it. Ensure the machine is threaded correctly. Also, check that the needles are fully inserted into the needle clamp, with the flat side to the back. Finally, make sure you are using needle system 130/705H.
How to prevent needle breakage on my Bernina L220?
If the needle breaks while using your Bernina Sewing Machine, it could be due to several reasons. The needles may be bent, blunt, or have damaged points, so replace them. Ensure needles are fully inserted into the needle clamp with the flat side to the back. Avoid pulling the fabric while sewing; instead, guide it gently with both hands.
How to fix seam pucker on my Bernina Sewing Machine?
Seam puckering on your Bernina Sewing Machine can occur if the thread tension is too tight; reduce the thread tension. It may also be caused by incorrect differential feed settings; adjust the differential feed to 0.7-N.
Why is my Bernina L220 seam wavy when sewing knits?
If you notice seam fluting or waving, especially when sewing knits with your Bernina Sewing Machine, avoid pulling the fabric; guide it gently instead. Also, the presser foot pressure may be too tight, so reduce it. Finally, ensure that the differential feed is correctly set; adjust it to N-2.
Why are the fabric edges curling on my Bernina L220?
If the fabric edges curl when using your Bernina Sewing Machine, the thread tension might be too tight. Try reducing the thread tension.
How to improve poor stitch formation on my Bernina L220?
Poor stitch formation in your Bernina Sewing Machine may be due to the thread not being wound correctly around the tension dials; check if the thread is lying between the tension discs. Also, the thread may have gotten caught; check the threading path of each thread.
What to do if the fabric does not feed evenly on my Bernina L220?
If the fabric does not feed evenly through your Bernina Sewing Machine, it might be because the presser foot pressure is too low. Adjust the presser foot pressure.
General| Brand | Bernina |
|---|---|
| Model | L220 |
| Category | Sewing Machine |
| Language | English |
Essential safety guidelines to prevent electric shock, burns, fire, or injury during use.
Specific instructions and precautions for servicing double-insulated machines, as per regulations.
Reminder to keep safety instructions for future reference.
Identification and labeling of various parts of the sewing machine.
List of included accessories provided with the sewing machine.
Instructions for setting up the thread guide rod and spool holders.
Guidance on placing spools, using cones, and handling thread nets.
Steps for connecting the foot control and operating the power/light switch.
Instructions for using the two-step lifter and changing the presser foot.
Procedures for opening/closing covers and operating the handwheel.
Guide on how to insert needles and information on compatible needle systems.
How to adjust stitch length and presser foot pressure for various fabrics.
Explanation and adjustment guide for the differential feed mechanism.
Initial steps for threading, including preparing guides and setting thread tension.
Detailed steps for threading all cover stitch variations.
Instructions for threading the 2-thread chain stitch.
Procedure for performing a sewing test for the cover stitch.
Procedure for performing a sewing test for the chainstitch.
Method for finishing seams differently after sewing.
How to adjust thread tensions for cover stitch for proper stitch formation.
How to adjust thread tensions for chain stitch for proper stitch formation.
Guidance on adjusting thread tension for various thread types.
Techniques for securing and unpicking seams using the cover stitch.
How to sew simple hems and flat joining seams on various fabrics.
Methods for sewing edges, bindings, decorative stitches, and topstitching.
Techniques for securing and unpicking seams using the chainstitch.
How to gather fabric and apply bindings using chainstitch.
How to use the tape guide accessory for sewing tapes and elastics.
Procedures for replacing the sewing machine bulb and regular cleaning.
A guide to identify and resolve common sewing issues encountered with the machine.
Detailed technical specifications and features of the sewing machine.
To Next Page
