Need help?Do you have a question about the Berrcom JXB-178 and is the answer not in the manual?
General| Measurement Distance | 3-5 cm |
|---|---|
| Measurement Time | ≤1 second |
| Display | LCD |
| Power Source | 2 x AAA batteries |
| Operating Temperature | 10°C - 40°C (50°F - 104°F) |
| Storage Temperature | -20°C - 55°C (-4°F - 131°F) |
| Memory | 32 readings |
| Fever Alarm | Yes |
| Measurement Method | Infrared |
| Temperature Range | 32.0°C - 42.9°C (89.6°F - 109.2°F) |
| Accuracy | ±0.2°C |
| Auto Power Off | Yes, after 30 seconds |
Ensuring the thermometer acclimates to ambient temperature before initial or subsequent use for accurate readings.
Procedure to switch between BODY, SURFACE, and ROOM temperature measurement modes.
Instructions on how to switch the temperature display unit between Celsius and Fahrenheit.
Step-by-step guide for powering on and performing a non-contact infrared temperature reading.
Information on the indicator for low battery voltage and the need for replacement.
Guide on how to replace the 2 AA alkaline batteries in the thermometer.
Common reasons for 'Lo' message display and advice on how to resolve them.
Common reasons for 'Hi' message display and advice on how to resolve them.
Links to download user guides and manuals for the infrared thermometer.
List of other infrared thermometer user manuals and guides.
To Next Page
