Bertazzoni M45CAFX - Setting the Language; Rinsing; Changing the Length of Time the Appliance Remains on; Setting the Clock

19
• Buzzer
• Contrast
Setting the language
To change the language on the display, proceed
as follows:
• Press the icon (B2) to enter the menu.
"CHOOSE LANGUAGE" is displayed.
• Press the icon (B9).
• Press the icons (B7) and (B8)
until the required language is displayed.
• Press the icon (B9) to confirm.
• Press the icon (B6) to exit the menu.
N.B.! If you choose the wrong language,
you can access the menu directly to modify the pa-
rameter.
• Press the icon button (B2) for at least 7
seconds until the appliance displays the va-
rious languages.
• Choose the required language as described
in the section "Using the appliance for the
first time".
Rinsing
This function enables you to obtain hotter coffee.
Proceed as follows:
• When you turn the appliance on, if you want
to make a small cup of coffee (less than 60
cc), preheat the cup by rinsing it with hot
water.
• If on the other hand more than 2/3 minutes
have passed since the last coffee was made,
before requesting another coffee, you must
preheat the brewing unit by first pressing the
icon (B2) to enter the menu then the
icons (B7) and (B8) to select the
"RINSING" function.
Press the icon (B9). "RINSING...
PLEASE CONFIRM" is displayed.
Press the icon (B9) again.
Deliver the water into the underlying drip tray
or alternatively use this water to fill (and then
empty) the cup to be used for the coffee to
preheat it.
Changing the length of time the
appliance remains on
The appliance is set by default to go off automa-
tically 30 minutes after the last coffee has been
made.
To change this interval (max. 120 min), proceed
as follows:
• Press the icon (B2) to enter the menu
and then the icons (B7) and (B8)
until "SHUT-OFF TIME" is displayed.
• Press the icon (B9) to confirm.
• Press the icons (B7) and (B8) to
set the time after which the appliance will go
off (after 1/2 hour, 1 hour, 2 hours).
• Press the icon (B9) to confirm.
• Press the icon (B6) to exit.
Setting the clock
• Press the icon (B2) to enter the menu
and then the icons (B7) and (B8)
until "SET CLOCK" is displayed.
• Press the icon (B9).
• Use the icons (B7) and (B8) to
set the hour, then press the icon (B9) to
confirm.
• Use the icons (B7) and (B8) to set
the minutes, then press the icon (B9)
to confirm.
• Press the icon (B6) to exit the menu.
Setting auto-start time
This function programmes the time the machine
will come on automatically.
• Make sure the clock on the appliance has
been set.
• Press the icon (B2) to enter the menu
and then the icons (B7) and (B8)
until "START TIME" is displayed.
• Press the icon (B9).
• Use the icons (B7) and (B8) to
set the auto-start time, then press the
icon (B9) to confirm.
• Use the icons (B7) and (B8) to set
the minutes, then press the icon (B9) to
confirm.
• Press the icons (B7) and (B8) to
GB