EasyManua.ls Logo

Bertazzoni REF36FDFZXNT - Door Alignment and Handle Installation

Bertazzoni REF36FDFZXNT
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
EN
List of tools to be provided by the user
Pliers
Hinge
grommet
Lower hinge
Fastener-ring
Pliers
2.3 Leveling the doors
Precautions to take before this operation
1) Before performing this operation, make sure that
the refrigerator is disconnected from the power
source.
Before adjusting the door, take precautions to prevent
any bodily injury.
2) Raise the lower door up to the level of the higher
door.
3) Using pliers, insert the supplied fastener ring into
the gap between the hinge-grommet and the lower
hinge. The number of fastener rings you need to insert
will depend on the gap. See the figure.
DIAGRAM OF DOOR ADJUSTMENT
Not level

Table of Contents