EasyManua.ls Logo

Bertazzoni REF36FDFZXNT - Operational Functions Overview

Bertazzoni REF36FDFZXNT
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
EN
Freezer drawer
Press the FREEZER TEMP button to select the freezer
drawer temperature, and then press the “-” and “+”
temperature control buttons to adjust the temperature
in the freezer drawer. When the “-” button is pressed
once, the temperature will drop by 1°C/1°F. After
reaching -22°C/-7°F, the temperature display goes
back to -14˚C/7˚F. When the “+” button is pressed
once, the temperature will rise by 1°C/1°F. After
reaching -14°C/7°F, the temperature display returns
to -22˚C/-7˚F. The setting will take eect after locking.
Temperature mode
To change the default temperature mode to
Celsius or Fahrenheit, press the “+” and “-” buttons
simultaneously and hold for 3 seconds.
Water/ice maker dispenser selection:
Touch the button to select the desired mode; the
indicator light will come on.
Note:
Water dispenses immediately after the lever
is pressed, and ice (cubed and crushed)
dispenses 3 seconds after the lever is
pressed.
Ice Maker On/O
When the ice maker is turned on, the ICE MAKER ON/
OFF light will come on; when the ice maker is turned
o, the ICE MAKER ON/OFF light will turn o after a
3-second delay. Press the ICE MAKER button to turn
on the ice maker; the corresponding symbol will light
up. Press the ICE MAKER button a second time to turn
o the ice maker; the symbol will no longer be lit. The
change will take eect after locking.
Note:
The ice maker will dispense ice into the ice-
making chamber when the ICE MAKER is on,
even if the ice storage box is removed.
Replacing the water filter
Replace the water filter every 6 months or if there is
a noticeable reduction in water flow. When the filter is
used for more than 6 months and the WATER FILTER
symbol flashes, press the WATER-FILTER button for 3
seconds to reset the reminder. The buzzer sounds 3
consecutive times.
Setting the boost modes
Super Cool:
Press and hold the FRIDGE TEMP button for 3 seconds
to enter SUPER COOL mode;the fridge icon will turn
blue. SUPER COOL mode will take eect after locking.
When SUPER COOL mode is activated, the refrigerator
temperature is automatically set at 1°C/34°F. When
SUPER COOL mode is deactivated, the refrigerator
temperature automatically returns to the temperature
set before SUPER COOL mode was activated.
Super Freeze:
Press and hold the FREEZER TEMP button to enter
SUPER FREEZE mode;the freezer drawer icon will
turn blue. SUPER FREEZE mode will take eect after
locking.; the freezer temperature is automatically
set at -22°C/-7°F. When SUPER FREEZE mode is
deactivated, the freezer temperature automatically
returns to the temperature set before activation of
SUPER FREEZE mode.

Table of Contents

Other manuals for Bertazzoni REF36FDFZXNT

Related product manuals