EasyManua.ls Logo

Bertello One - Gas and LP Cylinder Management; Important LP Cylinder Information; Connecting the Liquid Propane Cylinder

Bertello One
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT LP CYLINDER INFORMATION
Failure to follow these DANGER statements exactly may result in a fire causing death or serious injury.
DANGER
NEVER Store a spare LP Cylinder under or near the Bertello Oven.
NEVER fill the tank beyond 80% full.
CONNECTING THE LIQUID PROPANE CYLINDER
All Bertello Oven liquid propane gas regulators are equipped with a UL-listed tank
connection as per the latest edition of ANSI Z21.58. This will require a liquid propane
tank that is similarly equipped with a Type 1 connection in the tank valve. This Type 1
coupling allows you to make a fast and totally safe hookup between your gas Bertello Oven and
your liquid propane tank. It eliminates the chance of leaks due to a POL fitting that is
not properly tightened. Gas will not flow from the tank unless the Type 1 coupling is fully
engaged into the coupling.
WARNING: Make sure that the LP cylinder valve is closed. Close by turning valve clockwise.
DANGER:
Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while
you check for leaks. Sparks or flames will result in a fire or explosion which can cause serious bodily injury
or death, explosion which can cause serious bodily injury or death, and damage to property.
GAS INSTRUCTIONS