Liquid Propane (LP) Cylinder(s)
● The joint where the hose connects to the LP cylinder must be leak tested each
time the LP cylinder is reconnected. For example, test each time the LP cylinder is
● Be sure the regulator is mounted with the small vent hole pointed downward so
that it will not collect water. This vent should be free of dirt, grease, bugs etc.
WARNING: Replacement LP tanks must match the regulator connection supplied with this Oven.
LIQUID PROPANE CYLINDER REQUIREMENTS
● Check to be sure cylinders have a D.O.T. certification (1), and date tested (2)
is within five years. Your LP gas supplier can do this for you.
● All LP tank supply systems must include a collar to protect the cylinder valve.
● The LP cylinder must be a 20-lb. size approximately (18¼ inches high, 12¼
● The cylinder must be constructed and marked in accordance with
the Specifications for LP - Gas Cylinders of the U.S. Department of
Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes or Transportation of Dangerous Goods; and
Commission, as applicable.
To Next Page
Loading...