Accessories
Cover – of clear anodized or paint finished aluminium.
Programme selector – PSK-2, PSW-2, PS-4C and PS-3A.
Activation units – see separate installation instructions.
Extension unit, EXA- to be used if additional functions are required
e.g. presence impulse, presence detection, Push and Go.
Control unit, CSDA-F – to be used e.g. when the operator is installed on fire or
fume gas protected doors or for connection of 24V AC to
an electric striking plate
Arm system – PUSH, SAS-F and PULL.
Arm stop – to be mounted on pushing arm system to prevent more than 100°
opening
Shaft extension –20, 50 and 70 mm (3/4”, 2” and 2-3/4”).
To Next Page
Loading...
