What to do if Besam Door Opening System motor starts but door won't open?
If your Besam Door Opening System's motor starts but the door won't open, first ensure that the mechanical locks are unlocked. Additionally, check beneath the door to make sure nothing is obstructing its path.
Why does my Besam Door Opening System door open and close continuously?
If your Besam Door Opening System door opens and closes continuously, check if there are any moving objects within 39-59 inches (1-1.5 m) of the door, assuming an automatic activation unit is installed.
What to do if Besam Door Opening System door does not close?
If your Besam Door Opening System door doesn't close, try adjusting the program selector. Also, if a safety sensor is installed, ensure there are no obstructions in the detection zone. Finally, check underneath the door to ensure nothing is jammed.
How to troubleshoot Besam Door Opening System when the motor does not start?
If the motor of your Besam Door Opening System doesn't start, try changing the setting of the program selector. If a sensor is installed, check for any objects in the detection zone. Also, check the mains switch and fuse in the building.
Information on potential radio frequency interference and compliance.
Guidelines for proper disposal of products and packaging to prevent environmental harm.
Defines the owner's responsibilities for correct operation, maintenance, and record-keeping.
Details the warranty terms, coverage, and exclusions for Besam products.
Recommends regular inspections by trained personnel for safe and reliable operation.
Describes the SW200i's design for continuous use, safety, and suitability for various door types.
Explains the SW200i's mechanical and electrical operating principles.
Lists manufacturer, address, model type, power supply, consumption, and compliance standards.
Provides a checklist for daily and periodic safety inspections to prevent malfunctions and injuries.
Specifies signage for low-energy automatic doors per ANSI/BHMA A 156.19.
Details signage requirements for automatic doors per ANSI/BHMA A 156.10.
Lists optional add-ons to improve functionality like position switches and key switches.
Lists optional add-ons to enhance safety and comfort, such as safety sensors.
Provides solutions for common problems like doors not opening, closing, or starting.
Recommends maintenance intervals for service kits and components based on operation cycles.
Lists other product categories and services offered by Besam, including door systems and activation units.
General| Brand | Besam |
|---|---|
| Model | SW200i |
| Category | Door Opening System |
| Language | English |
To Next Page
