Need help?Do you have a question about the Besam PowerSwing and is the answer not in the manual?
General| Hold-open Time | Adjustable, typically 0-30 seconds |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Power Supply | 230 VAC, 50/60 Hz |
| Opening Width | Up to 1200mm |
| Opening Angle | Adjustable |
| Opening Speed | Adjustable |
| Closing Speed | Adjustable |
| Safety Features | Obstacle detection |
| Operating Modes | Automatic, manual |
| Compliance | EN 16005 |
| Control Options | Push buttons, access control systems |
| Type | Electromechanical swing door operator |
Overview of CSDA, CSDA-S, EXA, and CSDA-F control units.
Details on connecting control units, extension units, and terminals.
Details adjustment screws for spring force, pump pressure, and limit switches.
Guide for initial start-up and adjusting opening speed.
Instructions for adjusting the closing speed of the operator.
How to adjust the closing torque (spring force) of the operator.
Procedures for adjusting the opening torque (pump pressure).
To Next Page
