Best Divers Becam 4K EIS - Playback; Playing Back Videos and Photos

16
EN
Playing back videos and photos
To enter the playback menu:
1. Verify the camera is in camera mode.
2.Press the Up/Playback Button to enter the playback menu
3. Repeatedly press the Power/Mode Button to cycle through
video and photo
4. Press the Shutter/Select Button to select desired option
5. Up/Playback Button or Down/Wi-Fi Button to cycle
through the various options
6. Press the Shutter/Select Button
7. To return to the playback menu, press the Power/Mode
Button
8. To exit, hold down the Up/Playback Button for two seconds
To record video, verify the camera is in video mode. If the video
icon on your camera’s LCD screen is not showing, press the
Power/Mode Button repeatedly until it appears.
To start recording:
Press the Shutter/Select Button. The camera will emit one
beep and the camera status lights will flash while recording.
To stop recording:
Press the Shutter/Select Button. The camera status lights stop
flashing and the camera emits one beep to indicate recording
has stopped.
PLAYBACK
VIDEO MODE