19
tedly until it appears. In Burst Photo mode, your camera takes
3 photos in 1.5 seconds.
To take a Burst Photo series:
Press the Shutter/Select Button the camera will emit camera
shutter sounds.
To capture a Time Lapse series, verify the camera is in Time
Lapse mode. If the Time Lapse icon on your camera’s LCD
screen is not showing, press the Power/ Mode Button repea-
tedly until it appears. In Time Lapse mode your camera captu-
res a series of photos at 2,3,5,10,20,30 or 60 seconds intervals.
To take Time Lapse:
Press the Shutter/Select Button. The camera initiates
countdown and emits the camera shutter sound each time a
photo is taken.
1. Verify the camera is in Camera Mode.
2. Press and hold the Shutter/Select Button for three seconds.
3. Repeatedly press the Power/Mode Button to cycle through
camera modes.
4. Press the Shutter/Select Button
5.To exit: hold down the Shutter/Select Button for three se-
conds.
The Ez iCam APP (4k & 2.7K not supported) lets you
EN
control your camera remotely using a smartphone or tablet.
Features include full camera control, live preview photo
playback and sharing of select content and more.
1. Download the Ez iCam APP to your smartphone or tablet
at the Apple App store or Google Play.
2. Press the Power/Mode Button to power camera ON.
3. Make sure the camera is in camera mode.
4. Press the Down/Wi-Fi Button to turn on Wi-Fi.
5. In your smartphone or tablet’s Wi-Fi setting, connect to the
network called “ICAM-N9” followed by a series of numbers.
6. Enter the password “1234567890”.
7. Open the Ez iCam APP on your smartphone or tablet.
The Ez iCam APP is compatible with smartphone or tablets
listed below:
For Apple iOS: iPhone 5, 5S, 6, 6 plus,7 (iOS 10), iPad air,
iPad mini (iOS 10).
For Android: Android 4x Quad-core devices.
VIDEO STORAGE
Video mode 4K/25 e 2.7K/30: Automatically save a video file every
5 minutes.
Video mode 1080P e 720P: Automatically save a video file every
10 minutes.
To Next Page
Loading...