BestCode Next 8 Series - Ink Management; When to Add Ink; How to Add Ink

When to Add Ink
The BestCode Next Series 8 CIJ will begin requesting
an Ink bottle be added when the Float switch in the
Ink Tank is in the low state.
An on-screen pop-up Ink Warning, 10-0003 will
occur every 6 minutes while the Ink Tank is in this
State.
After 250,000,000 drops have been printed while in
the low state, the system will give the Empty
warning 10-0002.
A bottle of SmartFill Ink must be added to the
machine before the Jet can be started.
How to Add Ink
1. Place 1 capped bottle of Ink in the Ink
Smartfill Cup.
2. Make sure the SmartFill symbols are
aligned.
3. Press the Ink Status button on the
Screen.
4. This process works for Low and Empty
situations.
Low
Empty
5. Wait for the pop-up (10-0001)
6. DO NOT PRESS OK