BestCode Next 8 Series - Page 7

How to Add Makeup
1. Place 1 capped bottle of Makeup in the
Makeup Smartfill Cup .
2. Make sure the SmartFill symbols are aligned.
3. Press the Makeup Status button on the
Screen.
4. This process works for Low, Empty, and OK
situations.
Empty
Low
OK
5. Wait for the pop-up (11-0001)
6. DO NOT PRESS OK
7. Remove the Makeup bottle, and remove the
cap
8. Insert the bottle and press firmly to break the
foil seal.
9. Wait for 1-2 minutes for the bottle to drain
10. Discard the empty Makeup bottle in
accordance with local regulation.
11. Press OK on the Success screen pop-up (11-
0001)