BESTE X9 - Charging Steps and Tips; Charging Steps; Charging Tips and Warnings

13. Improper disposal of used batteries may seriously pollute the environment.
Please abide by local regulations when disposing of this battery.
Tips:
1. When the internal temperature of the battery exceeds 50°C, the battery is in
a protected state and cannot be charged.
2. After fully charged, the electric scooter exhausts its stored power after about
90-120 days of standby. If it is not charged in time, it may cause damage to
the battery due to excessive discharge. This damage is unrecoverable and it
is beyond of our warranty.
6.3 Charging steps
1. Open the dust cover on the battery charging stand.
2. Connect the DC plug of the charger to the battery charging socket.
3.Connect the AC plug of the charger to the AC power (100-240V,50/60Hz)
socket, the red light on the charger will light up, start charging, and the
indicator will turn green when the charging is completed.
Tip: When the battery is charged separately, the charging status can be viewed on
the charging indicator on the battery. It displays red color when charging and green
color after full charging.
Changing method 1: Changing method 2:
Charging
indicator light
Parameter
Battery
interface
Note:
Charging port
Only use the original electric scooter charger for charging. Do not use any other
models of power chargers to avoid danger caused by voltage mismatch.
-15- -16-
Product name Electric scooter
Item No.
X9
Main specification
Unfolding size:
mm*mm*mm 1110*530*1230
Folding size:
mm*mm*mm
1110*530*535
Center distance of front and rear wheels
mm
825
Net Weight kg
23
Max speed km/h
40
Max load
kg
100
Max climbing angle
°
15
Operating temperature
°C
-10 ~ +40
Storage temperature
°C
-20 ~ +45
Waterproof level
/
IP54
Battery specification
Battery type
/
Li-ion batter y
Battery capacity
Ah
15.6
Rated voltage(DC)
V
36
Maximum charging voltage(DC)
V
42
Motor specification
Motor type
/
Permanent magnet
brushless
Rated power
W
500
Rated voltage
V
36
Charger specification
Input voltage(AC)
V
100~240(50~60Hz)
Output Power
W
84
Output voltage
V
42
Output current
A
2