BESTE X9 - Product Assembly and Folding; Scooter Assembly and Disassembly; Folding the Electric Scooter

Product assembly
1. How to assemble
Assemble
2. How to fold
1. Unfold the pole and fasten the folding
lock.
2. Connect the two cables, which is the
communication wire between display pcb
and controller pcb. Align the notch and
connect.
Disassemble
3. Align the T-bar of the scooter then insert
it into the pole, use the screw provided
with the scooter to install and fix it.
1.Lift up the fixing bolt of folder. 2.Open the folder wrench.
1. Loosen the screws that secure the
T-bar of the scooter.
-05-
2. Pull out the head of the scooter, unplug
the communication line between the
display and the controller, the dismantling
part of the head of the scooter is complete.
3. Fold the pole.
-06-
4. Gently press down the hook to
the rear baffle.